View Full Version : new member requires advice/ tips on rotax choke use

keith rhodes - n/a
5-Feb-06, 01:29 PM
Hi i have a 503 rotax and find pulling it over from cold and holding the two choke wires on the carbs a hassle.best idea so far is a bungee cord to hold chokes on whilst pulling it over.

any bright ideas please ???

srn4 - n/a
5-Feb-06, 02:22 PM
Have a look at this...there are some handy ides...

http://hovercraft.org.uk/FUDforum2/index.php?t=msg&th=79 (http://hovercraft.org.uk/FUDforum2/index.php?t=msg&th=79&start=0&S=3d82ecb6e89f1255101ea06d1e9c1aa0) &start=0&S=3d82ecb6e89f1255101ea06d1e9c1aa0

Jamie Lewendon - n/a
5-Feb-06, 05:19 PM
Speak to Conrad at conair, or ken at K+M, both should be able to flog you a choke kit that will actually work on a 503, either single or twin carb, just tell them what you want. You can get little levers to fit on the carb, or a remote lever with two cables to go into the carbs.