PDA

View Full Version : K&M Products/HTD pulleys



hovercad - n/a
5-May-06, 10:13 AM
Hello All,

Are the details in the suppliers section still valid for K&M.

I have emailed over 2 weeks ago no reply and have phoned no answer.

It may be they are on holiday???

Maybe they didnt get it.?????



Not clear on a few bits so maybe some one else that have knowledge of the products they supply maybe able to answer.



I have a ROBIN EC44 engine.Crank is 30mm dia 1/10 taper.

Looking at 28 or 26 lower pulley.

woudlnt be able to use taper lock as the nut for the end of the crank.(LIke the TZR/RD fitting.)

Cant see any pulleys which would allow me to bolt to a surface ie the end of the crank adapter that have flanges.

Havent got a workshop or access to any mill/lathes pillar drills etc so cant machine one my self.Not that i want to reinvent the wheel.



Any surgestion much appreciated.



Craig

Nick Long - n/a
5-May-06, 11:14 AM
I would try phoning again. Tel no. 01522 789842

Ken was at the race meeting last weekend and he's usually pretty good.



Nick