PDA

View Full Version : where do i



jon_curtis - n/a
11-Sep-06, 06:33 PM
where do i get v pulleys from?

team black - n/a
11-Sep-06, 06:55 PM
From a v-pulley shop! Try Express bearings at Shepton Mallet or BSL

jar2 - n/a
11-Sep-06, 07:02 PM
If you need fairly small diameter ones then you can only get cast iron style with taperlok bushes (available from any engineering supplier). Heavy, but OK if they are small diameter.



If you need larger one (prop maybe?) then I would recommend getting them made from ali - not expensive as it is a pretty simple machining job (when compared to tooth belt pulleys!). If you get them made then get a parallel bore machined and fit Tollok or Fenlock taper bushes rather than using taperlok - much simpler and less stress on the ali.

Don83000 - n/a
11-Sep-06, 07:09 PM
Try here Jon its where I get most of my stuff.



http://www.hayley.co.uk

jon_curtis - n/a
12-Sep-06, 07:15 PM
thanks guys.



and john might be a prop, i do need some ilder pulleys!