PDA

View Full Version : 2008



hovmart - n/a
1-Sep-08, 09:14 PM
at the weekend http://uk.youtube.com/watch?v=rLBF5yu1vGk

Sean Atterbury - n/a
2-Sep-08, 07:20 AM
Looks like fun was had by all. http://hovercraft.org.uk/images/icons/smiley_icons/icon_smile.gif

profqwerty - n/a
2-Sep-08, 11:12 AM
Out of interest, how much skirt wear + tear would you expect from a finger skirt on tarmac / concrete? I've only used grass so it seems to be in very good condition still...

Nickcarswell - n/a
2-Sep-08, 04:35 PM
I couldnt give a value of such but *More* would be a good place to start. The damage tarmac causes to a skirt is significantly higher purely because of how the coarse the surface is - Also you can cause quite alot of damage to your hull if you turn quickly and scuff the underside.

jon_curtis - n/a
2-Sep-08, 05:32 PM
sand is one of the worst, not so much the damage from landing but certainly the skirt wear, takes the rubber straight off the material. also fine dry sand on a hot summer day will grit blast the duct/splitter plate/ flow straighteners etc. not to mention clog up air filters and such like.