Results 1 to 2 of 2

Thread: Tacho issue

  1. #1
    Less than 10 posts so far! USER IS NOT AVAILABLE
    Join Date
    Jan 2006
    Posts
    0

    Default Tacho issue

    Hi,



    Got a tacho problem - any advice on this?



    Rotax 503 with dual ignition, Falcon Tacho - cables = grey to ground.



    1) Installed guage with small white cable clipped as per Falcom instructions for dual ignition engines. Got double count reading = 4000 at idle, off the scale with a bit of gas, returns to 4000 on idle. Concluded that small white cable should not be clipped after all and reconnected it.



    With the small white cable connected I get:



    2) Start engine, 4000 revs. With a bit of gas, goes off the scale as per 1) but this time it stays there and refuses to return to 4000 on idle.



    Any ideas?



    Cheers



    Keith








  2. #2
    Less than 10 posts so far! USER IS NOT AVAILABLE
    Join Date
    Jan 2006
    Posts
    0

    Default Re: Tacho issue

    Mine is wired the same, grey to tacho and tacho to ground the other.



    Maybe it's broken, send it back for a new one.

Similar Threads

  1. Help! Tacho wiring
    By Jonathan - n/a in forum General Forum
    Replies: 5
    Last Post: 22-Jun-08, 04:58 PM
  2. briggs tacho help please
    By jon_curtis - n/a in forum General Forum
    Replies: 2
    Last Post: 15-Jan-08, 05:47 PM
  3. Got one - Current issue of FORTUNE magazine
    By H2O MAN - n/a in forum Hovercraft stuff for sale!
    Replies: 0
    Last Post: 3-Oct-07, 04:23 PM
  4. Tacho?
    By Mart366 - n/a in forum General Forum
    Replies: 5
    Last Post: 15-Apr-07, 07:30 AM
  5. TZR/TDR tacho
    By tonybroad - n/a in forum General Forum
    Replies: 2
    Last Post: 30-Sep-06, 10:31 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •