Page 1 of 2 12 LastLast
Results 1 to 8 of 13

Thread: Fuji Robin Spares

  1. #1
    Less than 10 posts so far! USER IS NOT AVAILABLE
    Join Date
    Apr 2006
    Posts
    0

    Default Fuji Robin Spares

    Hi All



    I need a pair of new carb attachment rubbers for my ec44 and yes i know spares are hard to find but can anyone tell me the address or phone number of a spares supplier and is it possible to use the rubber tubes from another make of engine.



    Regards John

  2. #2
    Less than 10 posts so far! USER IS NOT AVAILABLE
    Join Date
    Jan 2006
    Posts
    0

    Default Re: Fuji Robin Spares

    What size are the carbs, OD on the engine side, and can you measure the hole pitch of the mountin bolts. I'll have a look.



    Jamie

  3. #3
    Less than 10 posts so far! USER IS NOT AVAILABLE
    Join Date
    Apr 2006
    Posts
    0

    Default Re: Fuji Robin Spares

    Hi Jamie



    Carb OD on the engine side is 40mm and the engine flange hole centers are 62mm in the vertical plane. ive pulled the heads and i also need at least one piston as with the extra air comeing in thru the bad rubber it has burnt one piston top and nipped a ring.



    Regards John

  4. #4
    Less than 10 posts so far! USER IS NOT AVAILABLE
    Join Date
    Mar 2006
    Posts
    0

    Default Re: Fuji Robin Spares

    Hello John,

    Just out of interest.

    What size duct and what pulley sizes do you use???





    regards

    Craig


  5. #5
    Less than 10 posts so far! USER IS NOT AVAILABLE
    Join Date
    Mar 2006
    Posts
    0

    Default Re: Fuji Robin Spares

    hello Again,

    Any clues where to get an adaptor for the crank???





    Craig


  6. #6
    Less than 10 posts so far! USER IS NOT AVAILABLE
    Join Date
    Jan 2006
    Posts
    0

    Default Re: Fuji Robin Spares

    What size piston do you need?

    What are the rings like?



    I'll have a look in the bag of random carb rubbers I acquired.



    Cadfly.

    I can knock you up a crank adaptor if you can send me a sketch of what you are looking for.



    Jamie

  7. #7
    Less than 10 posts so far! USER IS NOT AVAILABLE
    Join Date
    Apr 2006
    Posts
    0

    Default Re: Fuji Robin Spares

    Hi Craig



    Duct size is 63cm and pullys are 30 teeth and 56 teeth



    John

  8. #8
    Less than 10 posts so far! USER IS NOT AVAILABLE
    Join Date
    Apr 2006
    Posts
    0

    Default Re: Fuji Robin Spares

    Hi Jamie



    Piston is 70mm one of the rings on mine is welded to the piston with alloy but with care it might come out the other is ok and still good gap in the bore.



    John


Similar Threads

  1. Fuji Robin EC44PM
    By Koolamundo - n/a in forum General Forum
    Replies: 8
    Last Post: 11-Jun-10, 08:53 PM
  2. fuji robin ec25ps-04 parts
    By rdhydro - n/a in forum General Forum
    Replies: 6
    Last Post: 24-Nov-09, 10:08 PM
  3. fuji robin 440 motor
    By btruhc - n/a in forum General Forum
    Replies: 1
    Last Post: 4-Oct-07, 02:10 PM
  4. Fuji robin 440 engine
    By btruhc - n/a in forum Hovercraft stuff for sale!
    Replies: 0
    Last Post: 5-Sep-07, 09:31 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •