Results 1 to 4 of 4

Thread: longer number plate bolts

  1. #1
    Less than 10 posts so far! USER IS NOT AVAILABLE
    Join Date
    Dec 2005
    Posts
    0

    Default longer number plate bolts

    i've put an ali strip around the craft and now standard number plate bolts are just too short to get the large washer on as well - does anyone know a supplier of longer bolts or general plastic/nylon bolts



    Ken says he can't get hold of the longer ones



    thanks in advance



    Tony

  2. #2
    Less than 10 posts so far! USER IS NOT AVAILABLE
    Join Date
    Jan 2006
    Posts
    0

  3. #3
    Less than 10 posts so far! USER IS NOT AVAILABLE
    Join Date
    Feb 2006
    Posts
    0

    Default Re: longer number plate bolts

    Hi tony

    i had the same problem, i enquired at my local nuts and bolt place ,he could get them but turned out very exspensive.

    i used steal in the end.

  4. #4
    Less than 10 posts so far! USER IS NOT AVAILABLE
    Join Date
    Jan 2006
    Posts
    0

    Default Re: longer number plate bolts

    i also had the same problem, however i found a place in shrewsbury called bearing man, cheep to

    you could try this link below to?



    ALLTHREAD PLASTICS LTD

    http://www.allthread.co.uk



    regards



    simon.


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •