Results 1 to 5 of 5

Thread: where do i

  1. #1
    Less than 10 posts so far! USER IS NOT AVAILABLE
    Join Date
    Jan 2006
    Posts
    0

    Default where do i

    where do i get v pulleys from?

  2. #2
    Less than 10 posts so far! USER IS NOT AVAILABLE
    Join Date
    Jan 2006
    Posts
    0

    Default Re: where do i

    From a v-pulley shop! Try Express bearings at Shepton Mallet or BSL

  3. #3
    Less than 10 posts so far! USER IS NOT AVAILABLE
    Join Date
    Jan 2006
    Posts
    0

    Default Re: where do i

    If you need fairly small diameter ones then you can only get cast iron style with taperlok bushes (available from any engineering supplier). Heavy, but OK if they are small diameter.



    If you need larger one (prop maybe?) then I would recommend getting them made from ali - not expensive as it is a pretty simple machining job (when compared to tooth belt pulleys!). If you get them made then get a parallel bore machined and fit Tollok or Fenlock taper bushes rather than using taperlok - much simpler and less stress on the ali.




  4. #4
    Less than 10 posts so far! USER IS NOT AVAILABLE
    Join Date
    Jan 2006
    Posts
    0

    Default Re: where do i

    Try here Jon its where I get most of my stuff.



    http://www.hayley.co.uk

  5. #5
    Less than 10 posts so far! USER IS NOT AVAILABLE
    Join Date
    Jan 2006
    Posts
    0

    Default Re: where do i

    thanks guys.



    and john might be a prop, i do need some ilder pulleys!

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •