Page 2 of 2 FirstFirst 12
Results 9 to 11 of 11

Thread: Multi-wing blade lengths

  1. #9
    Less than 10 posts so far! USER IS NOT AVAILABLE
    Join Date
    Jan 2006
    Posts
    0

    Default Re: Multi-wing blade lengths

    Hi atters,

    I basically got my blades on the hub, calculated the length and added a few mm for good measure. Mounted the hub on a flat piece of wood the right distance away from the band saw blade.I then mounted the fan on the mount inside the duct and saw how much i needed to cut off! then just slowly cut bit by bit. Make sure the blades are at the angle they will be on the craft when u put it in the saw! this means u get perfect radius cut edges and small tip clearance

    Good luck

    Nick

  2. #10
    Less than 10 posts so far! USER IS NOT AVAILABLE
    Join Date
    Jan 2006
    Posts
    0

    Default Re: Multi-wing blade lengths

    Thanks Nick, will do

  3. #11
    Less than 10 posts so far! USER IS NOT AVAILABLE
    Join Date
    Oct 2006
    Posts
    0

    Default Re: Multi-wing blade lengths

    WingFan GB Ltd have just opened in the UK. They can supply P5Z blades and a new P6Z blade in Polyamide material, these will fit your application.

    The P6Z blade is unique to WingFan. It has a wider blade width than the P5Z but still fits the Z type hubs. Please go to www.wingfan.co.uk for full details

    Tel No. 0116 2662889 or 07932 628412

Similar Threads

  1. help multi-wing 5Z (part number ), Type Z - 9 or 6 blade hub
    By OSPREY - n/a in forum General Forum
    Replies: 2
    Last Post: 14-Oct-08, 09:20 PM
  2. UH 18 no wing yet
    By michael30.06 - n/a in forum General Forum
    Replies: 6
    Last Post: 26-Feb-08, 09:33 PM
  3. blade hub
    By mick - n/a in forum General Forum
    Replies: 4
    Last Post: 6-Oct-06, 01:44 AM
  4. blade adjustment
    By lazza - n/a in forum General Forum
    Replies: 34
    Last Post: 31-Mar-06, 08:50 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •