Results 1 to 2 of 2

Thread: Mirage build

  1. #1
    Less than 10 posts so far! USER IS NOT AVAILABLE
    Join Date
    Feb 2006
    Posts
    0

    Default Mirage build

    Hi all,



    I've just ordered a mirage hull from K&M, should be here in about 5 weeks.



    I have some questions about the thrust system though:



    The coupling block which KM sells,



    can it be replaced with a coupling shaft on from the flex coupling, with 2 pillow block bearings?



    I'm guessing the coupling block is to keep the bottom pulley of the belt drive dead steady whilst the engine moves slightly? Otherwise is there any other use it has?



    I'm planning on building the engine frames myself.

    I'm assuming the fan shaft is welded onto the frame, and the drive hub sits on this with bearings?



    How do people do minor adjustments to the positioning of the fanshaft to center it? guessing 2 bolts at right angles can be turned to shift it?



    The initial build will be with a 447, then i will put something else on later.



    What's the best way to do steearing on a mirage - single or double rudders?



    What sort of fan is used in the lift duct? 3z blades in a 9 blade hub right? i'm guessing 9 blades are used to generate the higher pressure/low flow rates.



    Are there any other issues anyone can think of at the moment?

    I have loads of fittings from my old hover; I only need 2 more skirt segments!

    Thanks for the help!

    Toby

  2. #2
    Less than 10 posts so far! USER IS NOT AVAILABLE
    Join Date
    Jun 2007
    Posts
    0

    Default Re: Mirage build

    Hi i have had great success with three craft using KM bottom block bearings. Using pillar block bearings are a step back in time.If you spend time setting your drive pullies and belt tension it should need no adjustment. In my experiance you might be better off putting more tension than usual on the belt when using the Rotax twin and a centreflex coupling this will stop the osolation on start up. Good luck on the build!

Similar Threads

  1. mirage GP sports cruiser
    By bryan - n/a in forum Hovercraft stuff for sale!
    Replies: 4
    Last Post: 3-Feb-09, 10:47 PM
  2. How much does an Eagle Mirage weigh?
    By profqwerty - n/a in forum General Forum
    Replies: 47
    Last Post: 2-May-08, 01:20 PM
  3. Mirage build - redone thrust frame
    By profqwerty - n/a in forum General Forum
    Replies: 33
    Last Post: 28-Oct-07, 07:32 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •