Results 1 to 2 of 2

Thread: Paul Hibbards massive garage clearout

  1. #1
    Less than 10 posts so far! USER IS NOT AVAILABLE
    Join Date
    Aug 2006
    Posts
    0

    Default Paul Hibbards massive garage clearout

    I’ve had a big garage sort out, so all the following are up for sale:



    I can deliver to race meetings in UK and Europe (apart from the moulds which you have to collect yourself!). I may be prepared to negotiate price on some things.



    Tel: 07889 800259

    Email: paulhibbard (at) hotmail (dot) com





    MOULDS

    - Set of moulds for hull "Lazer Evolution" (twin engine)

    Hull shape designed and raced by Paul until 2006. See picture of craft.

    Includes: Bottom mould, top deck mould in 2 parts (with bottom of 1m thrust duct and 560mm lift duct), duct mould (2/3 duct), seat mould.

    Moulds in polyester gel, polyester resin/chopped strand. Wooden reinforcing. 225

    [img]index.php?t=getfile&id=865&private=0[/img]



    RADIATORS

    - 1 brand new radiator as used in Pintail craft under lift engine. Never used. 45

    - Mounting brackets for above radiator for Pintail craft (Conair originals, never used) 10

    - 1 mini radiator. Plastic header, copper core. Used. 15

    - 2 mini radiators copper headers and core. Have been repaired, may need further attention. 5 each





    HOSES

    - 1 flexible radiator hose. 1m long. 22mm ID. 5

    - 25mm ID water hose. New. 2m available 6 per m





    BELTS

    - 2 HTD belts 1600 8M*50. Have run some time. 7.50 each

    - 1 HTD belt 1600 8M*50. Few hours but small stone through has made blister. 7.50

    - 1 HTD belt 1200 8M*50. Has run. 5

    - 1 HTD belt 1800 8M*30. Has run. 5





    PULLEYS AND TRANSMISSION

    - 1 Centreflex no.8 steel centre boss. Machined for Rotax 779 1:7 taper shaft. With washer and bolt for Rotax 779. 20

    - 1 aluminium pulley. 72 tooth HTD 8M 35mm wide. Centre has 25mm keyed shaft. 15

    - 1 cast iron pulley. 26 tooth HTD 8M*50. Machined for 1:10 taper shaft. 5

    - 1 cast iron pulley. 34 tooth HTD 8M*50. Type to take taper lock bush. Small damage to flange. 5

    - Aluminium spline ends for coupling type Powergrip 76SF. Machined for 1:10 taper shaft on each. 2 used coupling elements. 5 for lot





    MOUNTS

    - 3 aluminium mounts. AVA AL40/2. Used. 3 each

    - 1 aluminium mount. AVA AL40/2. Rubber is failed. 1

    - 2 very stiff Artic Cat mounts (flat diamond shape). 28mm high, imperial thread. New, unused. 10 each

    - 3 mounts AVM 209 type 9 (flat diamond shape). Used. 2 each.





    BLADES

    - 3 Multiwing 5ZR unused. Full length. White PAG. 7 each

    - 7 Multiwing 5ZL used. Cut down suitable for large clearance 1m (or smaller) duct with 12 blade hub. White PAG. 5 each

    - 5 Multiwing 5ZL used. Cut to 303mm long. Suitable for 900mm duct with 12 blade hub. White PAG. 5 each

    - 4 Multiwing 5ZL used. Cut to 275mm long. Suitable for 850mm duct with 12 blade hub. White PAG. 3 each

    - 7 Multiwing 4ZL used. Cut to 300mm long. Suitable for 900mm duct with 12 blade hub. Black PPG. 2 each

    - 9 Multiwing 3ZL used. Cut to 165mm long. Suitable for 550mm duct with 9 blade hub. Black PAG. 10 the lot





    FAN COMPONENTS / HUBS

    - 1 Vortex fan drive hub. Used. (has been welded), includes bearing cones. 15

    - Front and back roller taper bearings for above fan drive hub. Used. 10

    - 1 Multiwing 10 blade fixed pitch hub. Used. Central boss. 10

    - 1 Multiwing 20 blade fixed pitch hub. Used. Central boss. 20





    STEERING CABLES

    - 1 morse cable. 9ft heavy duty. Used. 10

    - 1 morse cable. 9ft light duty. Used. 10





    EXHAUST

    - 1 silencer for 125cc motorbike. Steel inner and outer. 22mm ID. 5





    GLASSFIBRE

    - 1 nose cone. Diameter suitable for 9 blade hub. Blue. Polyester / glass. 2

    - 1 Vortex ELS / Light platform for mounting on / joining duct cover. Blue. 3

    - 1 rudder. 900mm long with cut out for tail cone. Blue. 5

    - Glass mat. 936gsm biax +-45deg stitched. 2 per square meter. 50m^2 available

    - Urethane acrylate adhesive. Crestomer Advantage 10. 380ml cartridges. 3 each. 6 available

    - Urethane acrylate adhesive. Crestomer Advantage 30. 380ml cartridges. 3 each. 6 available





    ROTAX 779 ENGINE BITS

    - 1 set triple flat slide 38mm Mikuni carbuerettors for Rotax 779. 200

    - 1 cylinder Rotax 779 (cast liner). Used. 100

    - 3 exhaust manifold stubs (ball joint type) orginal Rotax 779. 5 each

    - 1 water pump and housing. Rotax 779. Used. 15

    - 1 reed valve, Rotax 779. Reed petal ok. 25

    - Miscellaneous engine gaskets for Rotax 779. Some new (base and exhaust). 5

    - Kimpex piston rings for Rotax 779. 4 standard ring sets (1 new). 1 2nd oversize square ring. 3 each set

    - 2 Engine bearers for Rotax 779 from Paul Hibbard Lazer Evolution hull. 2.50 each

    - 2 Steel wedge blocks between hull and rubber mount. From Paul Hibbard Lazer Evolution hull. 3 each





    POLARIS / FUJI BITS

    - 1 oil pump from Polaris 800 twin. 10

    - 2 Fuji Polaris recoil cases and miscellaneous inners (no springs). 5 for lot





    LIFT ENGINE BITS

    - 1 cylinder for Fuji 250 (EC25 PS). 20

    - 1 head for Fuji 250 (EC25 PS). 10

    - Lift engine frame for Fuji 250 (EC25 PS). Steel. 5





    SKIRTS SEGMENTS

    - Pintail skirt segments black. 2 sides, 1 front, 1 front corner, 1 rear corner, 1 rear. 4.50 each





    MISCELLANEOUS

    - 1 metal fuel can tank. 10 litres. Hole in top for fuel line. 10

    - Lightweight body armour, foam. Used. 5

    - 2 cans fluorescent yellow paint. 400ml. 4 each

    - 2 Roof rack cross bars for VW passat. Aerofoil shape. Aluminium. 25 for both

    - Aluminium coupling guard. 2

    Attached Images Attached Images

  2. #2
    Less than 10 posts so far! USER IS NOT AVAILABLE
    Join Date
    Dec 2005
    Posts
    0

    Default Re: Paul Hibbards massive garage clearout

    So i assume the kitchen sink has already been sold



    Tony

Similar Threads

  1. Garage clearance
    By Bob Coles - n/a in forum Hovercraft stuff for sale!
    Replies: 1
    Last Post: 16-Jun-08, 07:18 PM
  2. The End of Massive Model Hovercraft
    By Modelhovercraft - n/a in forum General Forum
    Replies: 29
    Last Post: 16-Jan-08, 06:50 PM
  3. Massive Model Hovercraft update
    By Modelhovercraft - n/a in forum General Forum
    Replies: 3
    Last Post: 28-Dec-07, 05:12 PM
  4. Garage Clear Out !!
    By Mark - n/a in forum Hovercraft stuff for sale!
    Replies: 0
    Last Post: 4-Mar-07, 07:16 PM
  5. Hatz off to Paul.....
    By Sean Atterbury - n/a in forum General Forum
    Replies: 0
    Last Post: 31-Jul-06, 08:10 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •