Page 1 of 2 12 LastLast
Results 1 to 8 of 9

Thread: TZR 250 1kt changes to electrical..flywheel......... ?

  1. #1
    Less than 10 posts so far! USER IS NOT AVAILABLE
    Join Date
    Dec 2006
    Posts
    0

    Default TZR 250 1kt changes to electrical..flywheel......... ?

    I bought one engine yamaha TZR 250 1kt for my Osprey Hovercraft and I need some help.

    I will cut the gearbox and I will use the K & M (Pulley 16 tooth H section steel, fits straight onto TZR crankshaft , and the pull start cup - manual wind )

    I want to ask : to fit this parts on engine it’s need it to remove these (look the picture)

    [img]index.php?t=getfile&id=1579&private=0[/img]

    and then how the engine work without these parts ?

    1.without generator

    2.without flywheel

    What are the changes to the electrical system ? (to start the engine generator without)

    I will use electric water pump !

    Attached Images Attached Images

  2. #2
    Less than 10 posts so far! USER IS NOT AVAILABLE
    Join Date
    May 2008
    Posts
    0

    Default Re: TZR 250 1kt changes to electrical ?

    you shouldn't have to remove those parts, i'm running exactly the same set up as u describe but i still have all thats in the picture.

  3. #3
    Less than 10 posts so far! USER IS NOT AVAILABLE
    Join Date
    Dec 2006
    Posts
    0

    Default Re: TZR 250 1kt changes to electrical ?

    yes but i need to install these pulley and manual start (I had bought it !)



    [img]index.php?t=getfile&id=1580&private=0[/img]

    [img]index.php?t=getfile&id=1581&private=0[/img]



    can you upload some pictures from yours ?

    thanks
    Attached Images Attached Images

  4. #4
    Less than 10 posts so far! USER IS NOT AVAILABLE
    Join Date
    May 2008
    Posts
    0

    Default Re: TZR 250 1kt changes to electrical ?

    I can't at the moment as its in pieces, but the pulley bolts straight onto the fan end of the crankshaft, then with the starter cup you drill 3 holes in the cup then 3 holes on the fly wheel and tap a thread into the holes on the fly wheel and the starter cup should bolt onto the fly wheel.



    I know its a bit long winded but that is the jist of it

  5. #5
    Less than 10 posts so far! USER IS NOT AVAILABLE
    Join Date
    May 2008
    Posts
    0

    Default Re: TZR 250 1kt changes to electrical ?

    If you're still confused heres a photo of the fly wheel.





    If i'm wrong, can someone correct me please?

  6. #6
    Less than 10 posts so far! USER IS NOT AVAILABLE
    Join Date
    Jan 2006
    Posts
    0

    Default Re: TZR 250 1kt changes to electrical ?

    im no expert on tzr's but you cant run the engine without the gen and flywheel, where do you think the spark will come from?



    lockey sounds exactly right, from what i have seen of these engines, you bolt the cup on the fly wheel, and the pulley on the other side of the crank! where pressumably, the clutch and gearbox once was!

  7. #7
    Less than 10 posts so far! USER IS NOT AVAILABLE
    Join Date
    Dec 2006
    Posts
    0

    Default Re: TZR 250 1kt changes to electrical..flywheel......... ?

    thanks for your help !

    now I understand.

    if someone have pictures from a complete engine with these parts (pulley ,munual wind start) it will be helpful for everyone .

    thanks

  8. #8
    Less than 10 posts so far! USER IS NOT AVAILABLE
    Join Date
    May 2008
    Posts
    0

    Default Re: TZR 250 1kt changes to electrical..flywheel......... ?

    I've managed to get my engine back together, heres a few photos.



    Here's the pulley

    [img]index.php?t=getfile&id=1584&private=0[/img]



    Here's the starter cup

    [img]index.php?t=getfile&id=1585&private=0[/img]



    and here's how it's bolted in

    [img]index.php?t=getfile&id=1586&private=0[/img]
    Attached Images Attached Images

Similar Threads

  1. Exhaust - TZR 250 (hovercraft 140)
    By OSPREY - n/a in forum General Forum
    Replies: 7
    Last Post: 23-Oct-08, 06:05 PM
  2. TZR 250 1KT WORKS WITH OTHER CDI (3MA ,2MA) ?????
    By OSPREY - n/a in forum General Forum
    Replies: 2
    Last Post: 13-Sep-08, 10:49 PM
  3. TZR 250 / TDR 250 differences ???
    By OSPREY - n/a in forum General Forum
    Replies: 2
    Last Post: 21-Jun-08, 09:28 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •