Results 1 to 5 of 5

Thread: 2008

  1. #1
    Less than 10 posts so far! USER IS NOT AVAILABLE
    Join Date
    Feb 2006
    Posts
    0

  2. #2
    Less than 10 posts so far! USER IS NOT AVAILABLE
    Join Date
    Jan 2006
    Posts
    0

    Default Re: 2008

    Looks like fun was had by all.

  3. #3
    Less than 10 posts so far! USER IS NOT AVAILABLE
    Join Date
    Feb 2006
    Posts
    0

    Default Re: 2008

    Out of interest, how much skirt wear + tear would you expect from a finger skirt on tarmac / concrete? I've only used grass so it seems to be in very good condition still...

  4. #4
    Less than 10 posts so far! USER IS NOT AVAILABLE
    Join Date
    Nov 2007
    Posts
    0

    Default Re: 2008

    I couldnt give a value of such but *More* would be a good place to start. The damage tarmac causes to a skirt is significantly higher purely because of how the coarse the surface is - Also you can cause quite alot of damage to your hull if you turn quickly and scuff the underside.

  5. #5
    Less than 10 posts so far! USER IS NOT AVAILABLE
    Join Date
    Jan 2006
    Posts
    0

    Default Re: 2008

    sand is one of the worst, not so much the damage from landing but certainly the skirt wear, takes the rubber straight off the material. also fine dry sand on a hot summer day will grit blast the duct/splitter plate/ flow straighteners etc. not to mention clog up air filters and such like.

Similar Threads

  1. 2008 AGM
    By sixpackpert - n/a in forum General Forum
    Replies: 6
    Last Post: 29-Feb-08, 10:49 AM
  2. Raid 2008
    By Vortex - n/a in forum General Forum
    Replies: 2
    Last Post: 24-Jan-08, 09:18 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •