Results 1 to 3 of 3

Thread: help multi-wing 5Z (part number ), Type Z - 9 or 6 blade hub

  1. #1
    Less than 10 posts so far! USER IS NOT AVAILABLE
    Join Date
    Dec 2006
    Posts
    0

    Default help multi-wing 5Z (part number ), Type Z - 9 or 6 blade hub

    I have an Osprey hovercraft with YAMAHA <font color="darkred">TZR 250 [/COLOR]ENGINE <font color="darkred">50hp[/COLOR] .

    Now runs with <font color="darkred">6 truflo blades [/COLOR]left rotation(max power 40hp)

    Top pulley <font color="darkred">H 54 tooth[/COLOR]

    Down pulley <font color="darkred">H 16 tooth[/COLOR]

    fan diameter 915mm with 7.5mm clearance

    <font color="darkred">Drive Hub Std [/COLOR]([
    url= http://www.avdw32.dsl.pipex.com/imag...b%20standard.j pg] http://www.avdw32.dsl.pipex.com/images/drivehub%20standard.j pg[/url])

    [img]index.php?t=getfile&id=1870&private=0[/img]

    I want to run the engine in max rev (50 hp) and i must change the blades and the fan hub. I am planning to put

    6 multi-wing 5Z blades (for 50hp..)

    Fan hub Type Z - 9 blade which fits on Drive Hub Std




    1.Can anyone tell me the <font color="darkred">part number of the multi-wing 5Z blades (left rotation)[/COLOR] or upload photograph with the blade code ?



    2.Can anyone tell me the <font color="darkred">part number of the fan hub Type Z - 9 [/COLOR]blade or of the fan hub Type Z - 6 blade(which fits on Drive Hub Std ) or upload photograph



    3.which fan hub it is <font color="darkred">better Type Z - 6 blade or Type Z - 9 [/COLOR]blade ?



    4.The blades which fits on <font color="darkred">Type Z - 6 blade hub [/COLOR]are the same with <font color="darkred">Type Z - 9[/COLOR] ?



    5.what type of multi-wing 5Z blades are better
    5ZL/ PPG 85MPa



    5ZL/ PΑG 100MPa

    5ZL/ PΑGΑΣ 105MPa

    5ZL/ PΑGΑST 100MPa



    thanks
    Attached Images Attached Images

  2. #2
    Less than 10 posts so far! USER IS NOT AVAILABLE
    Join Date
    Feb 2006
    Posts
    0

    Default Re: help multi-wing 5Z (part number ), Type Z - 9 or 6 blade hub

    it will work with the trueflow blades, have put 65hp throught then before now with no problem, they just dont like getting old, the sun makes them britel

  3. #3
    Less than 10 posts so far! USER IS NOT AVAILABLE
    Join Date
    Dec 2006
    Posts
    0

    Default Re: help multi-wing 5Z (part number ), Type Z - 9 or 6 blade hub

    Quote Originally Posted by hovmart
    it will work with the trueflow blades, have put 65hp throught then before now with no problem, they just dont like getting old, the sun makes them britel


    All races hovercraft have multi-wing blades .

    I will put multi-wing blades ,

    can anyone help me please ?


Similar Threads

  1. UH 18 no wing yet
    By michael30.06 - n/a in forum General Forum
    Replies: 6
    Last Post: 26-Feb-08, 09:33 PM
  2. Shaft size and type of steel
    By Pat Tobin - n/a in forum General Forum
    Replies: 1
    Last Post: 25-Aug-07, 09:03 AM
  3. rotax 503 exhaust straight part
    By Pat Tobin - n/a in forum General Forum
    Replies: 3
    Last Post: 14-May-07, 11:14 AM
  4. Multi-wing blade lengths
    By Sean Atterbury - n/a in forum General Forum
    Replies: 10
    Last Post: 26-Oct-06, 06:30 PM
  5. blade hub
    By mick - n/a in forum General Forum
    Replies: 4
    Last Post: 6-Oct-06, 01:44 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •